Parking Guidance Screen for Parking Guidance Control System
1 Product profile
The parking space guide plate is composed of high brightness LED module, drive unit, bracket and other parts. Install it above the front of the parking space. Receive the output information of the centralized controller, display the parking space attribute and license plate number of the parking space in the form of numbers and Chinese characters, guide the owner to park the vehicle on the correct parking space, and ensure the smooth flow of the parking lot and the full use of the parking space.
2 Product features
The guide screen adopts black aluminum alloy outer frame, the appearance is simple and atmosphere;
The guide screen adopts low power consumption design, with short circuit, overvoltage, overcurrent and overload protection;
The display content supports Settings to meet the use of various parking space types;
Green instructions are clearly discernible, with high luminous intensity, far visible distance, and wide perspective;
3 Technical parameters
|
Model: |
WBP-IED-1 |
|
Size: |
One-way, 410 * 183 * 56 mm |
|
Two-way 790 * 183 * 56 mm |
|
|
Three-way 1170 * 183 * 56 mm |
|
|
Appearance material: |
Black aluminum alloy outer frame |
|
Empty car space part: |
Screen-printed LED white glow word was used |
|
illuminant: |
Red and green double color LED lamp beads |
|
Point spacing |
4.75 mm |
|
Life length |
≥ 100,000 hours |
|
Working temperature: |
-30℃ ~ +65℃ |
|
Service voltage: |
AC220V±10 |
|
Maximum power dissipation: |
≤20 W (one-way) |
|
Ambient humidity: |
5％--9 5％ RH |
|
Communication mode: |
RS485 Bluetooth (For debugging) |
|
Communication distance: |
Rs485≤ 300m; Bluetooth≤5M Bluetooth Vacation 5M |
|
Pixel point density |
44,321 points / ㎡ |
|
Resolution ratio |
80 * 32 = 2,560 points |
|
Drive way |
constant current |
Table 3.1 Technical parameters of parking space guide plate
4 Product installation
The parking space guide plate is installed by ceiling lifting mode, and the power line and signal line are directly introduced from the bridge to the guide screen box by metal hose. The installation diagram is shown in Figure 4.1:
Figure 4.1 Schematic diagram of parking space guide plate installation
5 Wiring schematic diagram
Figure 5.1 Schematic diagram of the indoor guide screen wiring
Use maintenance
1) Non-system maintenance personnel shall not operate the system equipment at will to prevent misoperation and cause system failure.
2) After the system configuration file is completed, please make a backup to prevent it cannot be restored after damage and reduce the maintenance workload.
3) When replacing the faulty equipment, disconnect the power to prevent the equipment from burning during operation.
4) When the system cannot work normally, please check the power supply of each equipment first and whether it is mistakenly off.
Hot Tags: parking guidance screen for parking guidance control system, China parking guidance screen for parking guidance control system manufacturers, suppliers, factory