In recent years, the number of domestic vehicles has increased quite rapidly, and the supply of parking lots is also in short supply, which is unimaginable compared to 10 years ago. Now many domestic companies engaged in parking business can be said to be very popular, and the smart parking system means that many people will ask whether it is smart when choosing a parking pay system, which has greatly prompted some commercial districts or residential areas to pay attention to it. It is an inevitable trend to install a smart parking system for the renovation of the parking lot. So, what issues should be paid attention to when installing a smart parking system?
The smart parking lot system is not only loved by car users, but also a right-hand man for the administrator of the parking lot. Therefore, you should pay attention to the following points when installing the smart parking lot system:
1. Installation location of barrier gate and control machine
The installation location of the barrier gate and the control machine (card reading device) is very critical, because it involves the user's convenience. Generally speaking, the distance between the barrier gate and the control machine should not be less than 2.5 meters. If the distance is too close, some vehicles may hit the brake lever when swiping the card. The recommended distance is 3.5 meters. The width of the lane is also a consideration for the installation of barrier gates and controllers. The width of the lane should not be less than 3 meters. If it is too narrow, it will affect the smooth entry and exit of vehicles. The recommended width is 4.5 meters.
2. The length of the gate lever of the parking lot
If it is necessary to cut the brake lever, then it is necessary to re-adjust the moment balance evaluation and calculation according to the length of the lever, which can effectively avoid the motor overheating and wear of the reducer.
3. The installation position of the surveillance camera
The standard intelligent parking lot system generally has an image comparison function, so surveillance cameras must be installed at the entrance and exit. The viewing angle range of the surveillance camera should cover the position of the license plate when the vehicle reads the card, and the installation height is generally 0.5-2.5 meters.
4. The installation position of the sentry box
Although it is a smart parking lot, sometimes someone still needs to take care of it. The parking lot guard box plays the role of charging and management, and is generally installed at the exit. The sentry box is a small office, in which there are generally on-duty personnel and management computers, so there are requirements for the area, generally not less than 4 square meters.
5. Manage the installation location of the computer
The management computer of the parking lot system is generally placed in a sentry box or other management offices. The requirements for its installation location are: the distance between the host computer and the card reading device should not exceed 200 meters. In order to ensure the stable operation of the equipment in the subsequent process, the performance of each part of the parking lot system must be stable.
The intelligent parking lot system greatly improves the utilization rate of parking spaces and solves the problem of queuing at the entrance and exit of the parking lot. The system can effectively relieve the pressure of urban traffic, and the reasonable installation of the intelligent parking lot system can also avoid troubles in the future. At the same time, regular maintenance is also very important for the equipment.