Nowadays, many parking lots are required to renovate more intelligent. Therefore, here is a brief description of the installation and precautions for the parking lot equipment, pedestrian island and booth in the smart parking management system of parking lot.
First, the pedestrian island.
The pedestrian island is mainly used to place parking facilities and prevent vehicle collisions. Some parking lots need to be installed, while others no need. The installation of the pedestrian island has the following requirements:
1. Size of the pedestrian island. The height of the pedestrian island is generally 10 to 15 cm above the ground, and the installation area of the equipment is 10 cm or more larger than the size of the equipment. It can prevent the expansion screw from damaging the platform.
2. If a pedestrian island is built on the mud surface, it is required to dig the pit and the pedestrian land is more than 30 cm deep into the ground.
3. If it is on cement pavement or asphalt pavement, you can build a safety island directly on the ground, but you need to put steel bars on it. The method is to use a star shape to make a steel bar (Φ20 or more) at intervals of 25 cm, and the steel bar should be more than 5 cm deep into the ground. , exposed more than 5 cm.
Second, the booth
The booth is mainly used to manage temporary vehicles and tolls. For some parking lots without temporary vehicles, it is unnecessary to set up a booth. The location of the booth is generally set up at the entrance and exit to facilitate management fees. The booth will usually be equipped with parking lot management computers and other equipment. There will be staff working inside, and the size of the area is required to be more than 4 square meters.
Third, the installation parameters of other parking equipment.
1. The distance between the parking management computer and the card reader is preferably less than 100 meters, usually placed in the booth;
2. The center distance between the card reader and the gate is generally more than 2 meters, preferably about 2.5 meters;
3. The license plate recognition camera installation height is between 2 meters and 2.5 meters;
4. The size of the ground coil is 2 meters * 0.8 meters;
5. The minimum area of the booth is 2.*2 meters, which is 4 square meters;
6. The parking lot lane width should be greater than 3 meters;
If you want to know more about parking system, kindly link here: www.coma-carparking.com