Parking lock: Parking lock is a mechanical device that prevents others from occupying their own car parking spaces and allows their cars to stop.
1. The installation position of the parking lock is generally installed at 1/3 of the middle entrance of the parking space, and the installation conditions are required on the ground of the cement.
2. Determine the position of the parking space lock in the parking space. It is recommended to install it in the 1/3 position of the parking space. It must be installed on a flat and dry concrete floor.
3. First open the power lock with the key, remove the mounting lock on the bottom layer, and then use the installation marks on the picture to make four installation marks on the ground.
4. Use a hammer drill to punch a 50mm deep hole on the four marks marked on the ground. The diameter is 8~10mm.
5. Install the iron piece and the floor with a socket wrench.
6. Fix the iron piece and the floor, and fix the parking lock and iron piece. Finally, lock it with a lock. The installation of the parking lock can be done.
7. After installing the car parking lock, press the start button on the remote control to let the parking lock start up and down several times. After the error is ensured, the car parking lock can be used officially.
If you want to know more about COMA parking lock, kindly link here: COMA parking lock